Camera Tutorial
1.Getting to Know Cameras for Beginners
（1）Introduction to Camera Components
（2） Hardware specification parameters
（3）Photographic specifications
2. Package Contents
3. Using the Camera
Mobile App Tutorial
1. Connection Method
2.Usage Tutorial
(1) General Settings
（2）Photo and Video Settings
（3）Live Streaming Settings
（4）Modify the camera's WiFi name and password.
（5）Modifying "IP Settings" and Manual IP Address Setup
3.Firmware Upgrade Method
Download Tool of Filming Materials Tutorial
Software download and installation
1.Usage Tutorial (Windows)
（1）Connect to the camera.
（2）Download materials.
（3）Convert KDRaw files.
（4）Configuration Requirements and Recommendations.
2.Usage Tutorial（Mac OS）
（1）Connect the Camera
（2）Download Materials
（3）Other matters
3.Using Integrated SSD Module Reader
（1）Paragon Software Download and Installation
（2）Connecting and Using the SSD Card Reader
（3）Copying Materials
(4) Specifications
Kandao Studio V4 Tutorials
1.Function Introduction
2. Software Download and Configuration Requirements
3.Usage Tutorial
（1）Understanding Obsidian Pro files
（2）Interface introduction
（3）Material storage path
（4）introduction of material
（5）Stitching Process
Frequently Asked Questions
（1）Recording duration of SSD
（2）Running Kandao Live V2 requires computer performance.
(1) Download Obsidian Pro App
Please download the Android/iOS app "Obsidian Pro" from the download page.
(2) Connect Using Camera WiFi
Install the latest version of the Obsidian Pro App on your iOS device. (After the initial installation of the Obsidian Pro App, please connect to the internet to download the latest firmware.) Use your iOS device to connect to the camera's WiFi, and open the Obsidian Pro App to control the camera.
After opening the app and successfully detecting the camera, you can view basic information about the camera, such as the app version, firmware version, camera name, battery level, solid-state drive capacity, etc., as shown in the image below. Click "Start Shooting" to enter the main interface of the app, where you can remotely control the camera and modify camera parameters.
(3) Remote Connection and Multi-Camera Switching Control Using Local Network
Set the camera and the phone on the same local network. Open the app, and after successfully detecting the camera, you can view basic information about the camera, such as the app version, firmware version, camera name, battery level, solid-state drive capacity, etc., as shown in the image below. Click "Start Shooting" to enter the main interface of the app, allowing you to remotely control the camera and modify camera parameters.
Did this information help you?
