1. Global Setting

Click the global setting button to set the parameters.

2. Save the template

Click the button then you can save the current parameters as the template.

3. Change the single lens’ parameter

3.1 Change the exposure

1) Sync: In the sync mode, the exposure parameter for any single lens you set will also be set to all lenses at the same time. The parameter can be set to different values for different lens respectively when the camera is not in the sync mode

2) Auto: If you choose "Auto", you can set the EV

3) Manual: If you choose “Manual”, you can set the ISO and Shutter（Angle）

4) I-mode: If you choose “I-mode”, you can set the ISO

5) S-mode: If you choose “S-mode”, you can set the Shutter（Angle）

6) EV: range from -2 to 2

7) ISO: range from 100 to 3200

8) Shutter Angle: range from 30°to 360°

9) Shutter： Time-lapse: range from 1/ 6400s to 1/2s Photo: range from 1/6400s to 60s

3.2 Change the White Balance

1) Sync: In the sync mode, the white balance parameter for any single lens you set will also be set to all lenses at the same time. The parameter can be set to different values for different lens respectively when the camera is not in the sync mode

2) Auto: If you choose "Auto", the lens will set the White Balance according to the environment

3) Manual: If you choose “Manual”, you can set the Temperature and Tint

4) Temperature: range from 2500 to 10000 5) Tint: range from -32 to 32

Note: When the camera is shooting you can not change any parameters