Kandao VR Cam User Guide

1. Get to Kow the Kandao VR Cam

（1）Camera Introduction

（2）Tech Specifications

2. Packing List

3. Install Camera

4. Network Connection Methods

（1）LAN with Router

（2）DHCP Directly

5. Adjustment of Camera Components Before Live Streaming

Kandao Stream Software User Guide

1. Software Download and Configuration Requirements

2. Software Functions Introduction

（1）Menu Bar & Local Streaming

（2）Connect the camera and check its status

（3）Modify Camera Parameters

（4）Preview Mode Switching

（5）Real-time Adjustment Panel

3. Start Live Streaming

Frequently Asked Questions

1. What should I do if the live stream appears blurry?

2. What should I do if there is no sound in the live stream?

3. Is it normal for the camera to get hot?

4. What should I do if the image is abnormal?

（2）DHCP Directly

（1）Enable DHCP Direct Connection Mode (recommended when there are multiple cameras on the same LAN)

Important Note: Please be sure to disable the system firewall and antivirus software, and select the correct network card for enabling DHCP. In this method, the PoE switch does not need to be connected to a router.

（2）Search and Connect the Camera

Enable DHCP: Click "Settings" on the menu - "DHCP" - In the pop-up window, select the network card to connect to the PoE switch directly. The common IP address is 169.254.xxx.xxx, as shown in the figure.

    Please wait for about 10 seconds.
    Click on the top left corner of the interface to refresh the camera list and click on the camera's serial number (SN) :
    Successfully Connected

Important Note: For live streaming, the audio input needs to be selected through the Kandao Stream software on the computer to achieve audio-visual synchronization.

Did this information help you?